STUCCO TURCO INTERA - STN
DESCRIPTION
The product is an acrylic emulsion- and water-based, silicone-containing, wipeable, silk matt, decorative top coat interior wall paint.
FEATURES
It has high coverage and adherence. It can be wiped off thanks to its content of silicone additives. It prevents the formation of mould and algae on the surface. It provides a silky matte and decorative appearance on surfaces. It is solvent free. It can be diluted with water. It is a water-based product so it does not harm the environment and human health.
TECHNICAL PROPERTIES
| Structure | Acrylic emulsion-based |
| Color | White & colors available in STUCCO TURCO chart of paint colors |
| TS EN 13300 | Standard |
| Resistance to Wet Rubbing | Class 1 |
| Coverage | Class 2 ( 5.5 m2/L ) |
| Particle Size | S1 (fine) |
| Brightness | G2 (semi matt) |
| Resistance to Mould Growth | K1 (Resistant to moulds) |
| Thinner | Water |
| Amount of Consumption | 0,110 L /m2 depending upon surface roughness and absorbency (single coat) |
| Drying Time | For application of 2nd coat: 2 hours |
| Full Protection | 24 hours |
| Application Temperature | +5oC to +35oC |
| Application Tools |
Roll, brush |
* The above values are valid for + 23oC and 50% relative humidity. The time is shortened at high temperatures and extended at low temperatures.
AREAS OF USE
It is applied as a decorative and protecting material on appropriately prepared mineral surfaces such as black plaster, concrete, or cement board at interior spaces of all buildings, and also on old painted ceilings.
BENEFITS
It is easy to prepare and apply. It is ready for use. It provides high adherence to concrete and plaster-applied surfaces. It is resistant to water and frost. It is not affected from temperature differences.
INSTRUCTIONS FOR USE
Dust, swollen coats, dirt, oil, etc. present on application surfaces must be cleaned from the surface. Surfaces with old paints and synthetic surfaces must be cleaned thoroughly. If application is to be made on new mineral surfaces, the surface should be cured for at least 28 days. If necessary, the surfaces should be repaired with STUCCO TURCO REPAIR-PASTE. The surfaces to be painted should be primed with STUCCO TURCO PRIMER EXT-S. The surfaces to be painted should be primed with STUCCOO TURCO PRIMER INT. It is recommended that the primer to be used be of the same color as the selected interior wall paint. STUCCO TURCO INTERA SATEN should be mixed thoroughly before application. STUCCO TURCO INTERA SATEN should be diluted with water at the ratio of 15 to 20% by volume and mixed well until it becomes homogenous. It should be applied as two coats by means of a brush or a roll. A rest time of at least 2 hours should be allowed between coats. The ambient temperature and the temperature of the application surface should be at least +5oC during the application as well as for at least 24 hours thereafter. Application tools should be washed with water immediately after application.
PACKAGING
2.5 L, 7.5 L, and 15 L plastic buckets
STORAGE AND CONDITIONS AND SHELF LIFE
No more than three buckets should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Shelf life is 12 months from date of production under suitable storage conditions.
WARNINGS
S2: Keep out of reach of children.
S24/25: Avoid contact with skin and eyes.
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S 28: Wash with plenty of water in case of skin contact.
S29: Do not empty into drains.
S46: If swallowed, seek medical advice immediately and show this container or label.
SAFETY MEASURES
Work clothes, protective gloves, goggles, and masks suitable for workers health and safety should be used during the application. Due to irritant effects of uncured material, it should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.
RESPONSIBILITY
Our Company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.