DECO COAT - 2M
Cement based, fiber reinforced, decorative mineral outer facade coating with special additives.
It conforms to TS 7847 / June 2016 standard.
PROPERTIES
It has high water vapor permeability. It allows the buildings to breathe. It is resistant to external factors thanks to its content of special additives.
It has a waterproof feature. It has a natural and decorative appearance. It is easy to apply. It can be painted with exterior paints.
TECHNICAL PROPERTIES
| Structure | Cement based |
| Color | White |
| Mixture Ratio | 6.5-7.0 lt water/ 25 kg powder |
| Consumption Quantity | 2.5 – 3.0 kg /m2 |
| Brightness | G |
| Dry Film Thickness | E5 |
| Water Vapor Transfer speed | V1 |
| Water Transfer speed | W3 |
| Crack Bridging | A0 |
| CO2 Permeability | CO |
| Resistance to Mold Growth | K2 |
| Rest Time for Mortar | 5 Minutes |
| Particle Size | S4 |
| Drying Time | For application of 2nd layer: 2 hours |
| Full Drying | 2-3 days |
| Application Thickness | 2 mm |
| Application Temperature | between +5oC and +35oC |
| Application tools |
Steel trowel, plastic trowel, |
* The above values are valid for + 23oC and 50% relative humidity. The time is shortened at high temperatures and extended at low temperatures.
AREAS OF USE
It is used as a topcoat material on cement-based plasters, exterior facades and exterior facade thermal insulation systems of all buildings.
ADVANTAGES
It is easy to prepare and apply. It is ready for use. It provides high adherence to concrete and plastered surfaces. It is resistant to water and frost. It is not affected by temperature differences.
INSTRUCTIONS FOR USE
Dust, swollen layers, dirt, oil, etc. present at application areas must be cleaned from the surface. The surface must be clean, smooth, and solid. Before application, the surface must be moistened, and saturated with water in very hot and windy weather conditions.
25 kg of STUCCO TURCO DEKO COAT 2M should be mixed with an average 6-7 liters of clean water with a low speed mixer until a homogenous consistency is achieved. The mortar should be allowed to rest for 5 minutes before application and then mixed again. STUCCO TURCO DEKO COAT 2M should be spread with equal thickness onto the surface with a stainless steel trowel, and application thickness should be adjusted according to the biggest pattern stone. Pattern should be applied on the surface using a plastic trowel with circular motion. The patterning process should always be done with the mortar being wet. It cannot be left on the surface as the final layer material. It is absolutely necessary to apply paint on it after drying. When preparing the mortar, the recommended water content and rest periods must be observed. Application under direct sun should be avoided. The previously prepared and then hardened materials should not be included in the newly prepared mortar.
REFERENCE STANDARDS
TS 7847 / June 2016
PACKAGING
25 kg craft bags. (Reinforced with PE)
64 shrink bags on one palette (110x110 cm).
APPLICATION TOOLS
Steel trowel, plastic trowel, beater.
STORAGE AND SHELF LIFE
No more than four buckets should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Shelf life is 12 months from date of production under suitable storage conditions.
SAFETY MEASURES
Work clothes, protective gloves, goggles and masks suitable for workers health and safety should be used during the application. Due to irritant effects of uncured material, it should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.
RESPONSIBILITY
Our Company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.