STUCCO TURCO EXTERA - GRENA FLEX - S
DESCRIPTION
The product is an acrylic emulsion-based, elastic siding material with a silicon content, which can be applied at interior and exterior areas, which covers plaster defects with such patterns and such thickness that is achieved through the use of the product, and which is applied with a roll to give a pattern.
FEATURES
It covers plaster defects on the surface with such patterns and such thickness that is achieved through the use of the product. Thanks to its vapor permeability properties, it allows buildings to breathe. It is reinforced with high water repellents. It allows water to flow on the surface without being trapped. It is not affected from heavy weather conditions. It does not bluff, crack, and color change. It is a water-based product so it does not harm the environment and human health.
TECHNICAL SPECIFICATİONS
| Structure | Acrylic emulsion-based |
| Color | White & colors available in STUCCO TURCO chart of paint colors |
| Texture | Roll patterns |
| Thinner | Water |
| Amount of Consumption | 1.0-1.2 kg/m2 depending upon surface roughness and absorbency |
| Drying Time | For application of 2nd coat: 6 hours |
| Full Protection | 24 hours |
| Application Temperature | +5oC to +35oC |
| Application Tools | Roll |
* The above values are valid for + 23oC and 50% relative humidity. The time is shortened at high temperatures and extended at low temperatures.
AREAS OF USE
It is applied as a decorative and protecting material on appropriately prepared mineral surfaces such as black plaster, concrete, or cement board at interior and exterior spaces of all buildings, and is also applied on old painted surfaces.
BENEFITS
It is easy to prepare and apply. It is ready for use. It provides high adherence to concrete and plaster-applied surfaces. It is resistant to water and frost. It is not affected from temperature differences.
INSTRUCTIONS FOR USE
Dust, swollen coats, dirt, oil, etc. present on application surfaces must be cleaned from the surface. Surfaces with old paints and synthetic surfaces must be cleaned thoroughly. If application is to be made on new mineral surfaces, the surface should be cured for at least 28 days. If necessary, the surfaces should be repaired with STUCCO TURCO REPAIR-PASTE. The surfaces to be painted should be primed with STUCCO TURCO PRIMER EXT-S. It is recommended that the primer to be used be the same color as the selected exterior paint. STUCCO TURCO EXTERA GRENA FLEX-S should be mixed thoroughly before application. It can be applied directly with a roll in single coat applications or it can be applied to the surface by thinning with 5 percent clean water in two-coat applications. At least 5-6 hours should be allowed to expire between coats depending on application conditions. The ambient temperature and the temperature of the application surface should be at least +5oC during the application as well as for at least 24 hours thereafter, and the surface should not receive any rainfall. It should not be applied in very hot weather, in direct sunlight, or when strong winds or rainfalls are expected. Extremely hot surfaces should be moistened before application. For applications on wide surfaces, paper tapes should be used to avoid the presence of traces of joints during breaks, or the surface must be finished before application is interrupted. Application tools should be washed with water immediately after use.
PACKAGING
25 kg plastic buckets.
STORAGE CONDITIONS AND SHELF LIFE
No more than three buckets should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Shelf life is 12 months from date of production under suitable storage conditions.
WARNINGS
S2: Keep out of reach of children.
S24/25: Avoid contact with skin and eyes.
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S 28: Wash with plenty of water in case of skin contact.
S29: Do not empty into drains.
S46: If swallowed, seek medical advice immediately and show this container or label.
SAFETY MEARURES
Work clothes, protective gloves, goggles, and masks suitable for workers health and safety should be used during the application. Due to irritant effects of uncured material, it should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.
RESPONSIBILITY
Our Company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.